1. Ma, Ahmed Addad, Gang Ji?, Ming-Xing Zhang, Williams Lefebvre, Zhe Chen?, Vincent Ji Atomic-scale investigation of the interface precipitation in a TiB2 nanoparticles reinforced Al-Zn-Mg-Cu matrix composite，Acta Materialia 185 (2020) 287–299 IF=7.656
2. X.P. Li*, G. Ji, Z. Chen*, A. Addad, Y. Wu, H.W. Wang, J. Vleugels, J. Van Humbeeck, J.P. Kruth* Selective laser melting of nano-TiB2 decorated AlSi10Mg alloy with high fracture strength and ductility ACTA MATERIALIA 129 (2017) 183-193 ESI高被引论文 IF=7.656
3. C.Y. Dan, Z. Chen*, G. Ji, S.Y. Zhong*, J. Li, X.R. Li, F. Brisset, G.A. Sun, H.W. Wang, V. Ji Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates Scripta Materialia 166 (2019) 139–143 IF=5.079
4. Zhe Chen, Gang Ji, Nathalie Prud’homme, Ahmed Addad, Vincent Ji,Jerome Chevalierd and Guillaume Bernard-Granger Stabilization of the tetragonal phase in large columnar zirconia crystals without incorporating dopants Scripta Materialia 68 (2013) 559–562 IF=5.079
5. Q. Yang, Y. Ma, Z. Chen? , G. Ji, M.L. Wang, S.Y. Zhong? , Y. Wu, V. Ji, H.W. Wang A new powder metallurgy routine to fabricate TiB2/Al–Zn–Mg–Cu nanocomposites based on composite powders with pre-embedded nanoparticles Materialia 8 (2019) 100458 IF=暂无
6. Jun Liu, Zhe Chen*, Fengguo Zhang, Gang Ji, Mingliang Wang, Yu Ma, Vincent Ji, Shengyi Zhong, Yi Wu* & Haowei Wang Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process Materials Research Letters IF=6.600
7. Q. Yang, Y.T. Liu, J. Liu, L.Wang, Z. Chen*, M.L. Wang, S.Y. Zhong*, Y.Wu, H.W.Wang Microstructure evolution of the rapidly solidified alloy powders and composite powders Materials & Design 182 (2019) 108045 IF=6.289
8. X.L Xie, Y. Ma, C.Y. Chen, G. Ji*, C. Verdy, H.J. Wu, Z. Chen*, S. Yuan, B. Normand, S. Yin, H.L. Liao， Cold spray additive manufacturing of metal matrix composites (MMCs) using a novel nano-TiB2-reinforced 7075Al powder Journal of Alloys and Compounds 819 (2020) 152962 IF=4.650
9. Z. Chen, J. Li, A. Borbely, G. Ji, S.Y. Zhong*, Y.Wu, M.L. Wang*, H.W. Wang The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing Materials & Design 88 (2015) 999–1007 IF=6.289
10. Z. Chen, G.A. Sun, Y.Wu, M.H.Mathon, A. Borbely, D. Chen, G. Ji, M.L. Wang*,S.Y. Zhong*, H.W.Wang Multi-scale study of microstructure evolution in hot extruded nano-sized TiB 2 particle reinforced aluminum composites Materials & Design 116 (2017) 577–590 IF=6.289
11. Q. Yang, D.L. Cheng, J. Liu, L. Wang, Z. Chen*, M.L. Wang, S.Y. Zhong, Y. Wu, G. Ji, H.W. Wang Microstructure evolution of the TiB2/Al composites fabricated by powder metallurgy during hot extrusion Materials Characterization 155 (2019) 109834 IF=3.562
12. Jun Liu, Zhe Chen*,Fengguo Zhang, Gang Ji, Shengyi Zhong, Yi Wu, Mingliang Wang,Guangai Sun, Haowei Wang. Microstructural evolution and mechanical property of nanoparticles reinforced Al matrix composites during accumulative orthogonal extrusion process Materials Characterization 155 (2019) 109790 IF= 3.562
13. Y.K. Xiao, Z.Y. Bian, Y.Wu*, G. Ji, Y.Q. Li, M.J. Li, Q. Lian, Z. Chen*, A. Addad, H.W. Wang Effect of nano-TiB2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting Journal of Alloys and Compounds 798 (2019) 644-655 IF=4.650
14. Q. Yang, Y. Shen, J. Liu, L. Wang, Z. Chen*, M.L. Wang, S.Y. Zhong*, Y.Wu, H.W. Wang Microstructure and mechanical response of TiB2/Al–Zn–Mg–Cu composites with more addition of Zn Journal of Alloys and Compounds 816 (2020) 152584 IF=4.650
15. C.Y. Dan, Z. Chen*, M.H. Mathon, G. Ji, L.W. Li, Y. Wu, F. Brisset, L. Guo, H.W. Wang, V. Ji Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis Materials Characterization 136 (2018) 293–301 IF=3.562
16. Q.Yang, Y.Shen, J.Liu, L.Wang, Z.Chen*, M.L.Wang, S.Y.Zhong*, Y.Wu, H.W.Wang Microstructure and mechanical response of TiB2/Al-Zn-Mg-Cu composites with more addition of Zn Journal of Alloys and Compounds 816 (2020) 152584 IF=4.650
17. J.M. Lia,, J. Liu, L. Wang, Z. Chen*, Q.W. Shi, C.Y. Dan, Y. Wu, S.Y. Zhong*,H.W. Wang， Anisotropic behavior of TiB2 nanoparticles reinforced 2024Al composites rolling sheet Materials Characterization 162 (2020) 110196 IF=3.562
18. Fengguo Zhang, Zhe Chen*, Shengyi Zhong, Han Chen, Jun Liu, Qing Yang, Haowei Wang Strain measurement of particle-reinforced composites at the microscale: An approach towards concurrent characterization of strain and microstructure Micron 121 (2019) 33–42 IF=1.726
19. J. Liu, Z. Chen*, F.G. Zhang, G. Ji, Y. Ma, M.L. Wang, S.Y. Zhong*, J. Li, H. Wang, H.W. Wang Improved structural homogeneity and mechanical properties of nanoparticles reinforced Al composites after orthogonal thermomechanical processes Journal of Alloys and Compounds 767 (2018) 293-301 IF=4.650
20. Ming Wang, Yan Wang, Jun Liu, Zhe Chen*, Han Chen, Yi Wu, Fengguo Zhang,Haowei Wang Effects of Zn content on microstructures and mechanical properties of in-situ TiB2/Al-Zn-Mg-Cu composites subjected to hot extrusion MATERIALS SCIENCE AND ENGINEERING A 742 (2019) 364–372 IF=4.652
21. C.Y. Dan, Z. Chen*, G. Ji, S.H. Zhong, Y. Wu*, F. Brisset, H.W. Wang, V. Ji Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites Materials & Design 130 (2017) 357–365 IF=6.289
22. Yujiong Chen, Hua Sun, Zechen Li, Yi Wu*, Yakai Xiao, Zhe Chen*,Shengyi Zhong* and Haowei Wang Strategy of Residual Stress Determination on Selective Laser Melted Al Alloy Using XRD Materials 2020, 13, 451 IF=3.057
23. Qian Wang, Changzhi Liu, Ruijuan Yao, Hong Zhu, Xiaomin Liu, Mingliang Wang*, Zhe Chen*, Haowei Wang First-principles study on the stability and work function of low-index surfaces of TiB2 Computational Materials Science 172 (2020) 109356 IF=2.863
24. Mengxing Chen, Xiaopeng Li*, Gang Ji, Yi Wu, Zhe Chen*, Wouter Baekelant, Kim Vanmeensel, Haowei Wang and Jean-Pierre Kruth Novel Composite Powders with Uniform TiB2 Nano-Particle Distribution for 3D Printing Appl. Sci 2017, 7, 250 IF=2.474
25. Xiaofei Ju, Fengguo Zhang, Zhe Chen*, Gang Ji, Mingliang Wang, Yi Wu*,Shengyi Zhong and Haowei Wang Microstructure of Multi-Pass Friction-Stir-Processed Al-Zn-Mg-Cu Alloys Reinforced by Nano-Sized TiB2 Particles and the Effect of T6 Heat Treatment Metals 2017, 7, 530 IF=2.117
26. Mingliang Wang, Cunjuan Xia, Yi Wu, Dong Chen*, Zhe Chen*, Naiheng Ma and Haowei Wang Phase stability, elastic and electronic properties of Hf–Rh intermetallic compounds from firstprinciples calculations RSC Adv., 2017, 7, 20241 IF=3.119
27. Y. Tang, Z. Chen*, A. Borbély, G. Ji, S.Y. Zhong, D. Schryvers, V. Ji, H.W.Wang Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy Materials Characterization 102 (2015) 131–136 IF=3.562
28. Zhe Chen, Peng Zhang, Dong Chen, Yi Wu, Mingliang Wang*, Naiheng Ma, and Haowei Wang First-principles investigation of thermodynamic, elastic and electronic properties of Al3V and Al3Nb intermetallics under pressures JOURNAL OF APPLIED PHYSICS 117, 085904 (2015) IF=2.286
29. C. Zhou, W. Huang, Z. Chen*, G. Ji, M.L. Wang, D. Chen, H.W. Wang In-plane thermal enhancement behaviors of Al matrix composites with oriented graphite flake alignment Composites: Part B 70 (2015) 256–262 IF=7.635
30. C.Zhou, D.Chen, X.B.Zhang, Z.Chen?, S.Y.Zhong, Y.Wu, G.Ji, H.W.Wang The roles of geometry and topology structures of graphite fillers on thermal conductivity of the graphite/aluminum composites Physics Letters A 379 (2015) 452–457 IF=2.278
